TECHNICAL ANALYTICS
TECHNICAL Analytics
| Properties | Specified values as per IS:2046-1995, Type S, HGS | SIESTA confirms | Specified values as per IS:2046-1995, Type S, HGS | SIESTA confirms |
|---|---|---|---|---|
| Thickness | 1.00mm (±10%) | - | 1.00mm (±10%) | - |
| Resistance to surface ware | 350 (revolutions) | - | 350 (revolutions) | - |
| Resistance to immersion in boiling water - Mass increase (%) - Thickness increase (%) - Appearance | 10.0(Maximum) 11.8(Maximum) Not worse than 4 | - | 7.5(Maximum) 8.5(Maximum) Not worse than 4 | - |
| Resistance to dry heat 180 c | Not worse than 4 | - | Not worse than 4 | - |
| Dimensional stability at deviated temperature - Longitudinal (%) - Transverse (%) | 0.55 (Maximum) 1.025 (Maximum) | - | 0.44 (Maximum) 0.86 (Maximum) | - |
| Dimensional stability at 20 c - Longitudinal (%) - Transverse (%) | 0.375 (Maximum) 0.60 (Maximum) | - | 0.31 (Maximum) 0.49 (Maximum) | - |
| Resistance to impact by small diameter bal | 20N (Minimum) | - | 20N (Minimum) | - |
| Resistance to cracking | Not worse than 4 | - | Not worse than 4 | - |
| Resistance to scratching | 2N (Minimum) | - | 2N (Minimum) | - |
| Resistance to staining | Not worse than 5 | - | Not worse than 5 | - |
| Resistance to colour change (woolstandards) - In xenon arc light - In enclosed carbon arc light | Not worse than 6 Not worse than 5 | - | Not worse than 6 Not worse than 5 | - |
| Resistance to cigarette burns | Not worse than 3 | - | Not worse than 3 | - |
| Appearance | Should be free from foreign particles | - | Should be free from foreign particles | - |
| Properties | Specified values as per IS:2046-1995 | SIESTA Aura confirms |
|---|---|---|
| Product | High Pressure Decorative Laminated Sheets | |
| Size | 2440mm x 1220mm (8 x 4 ft.) | |
| Thickness | 0.8 mm(± 10%) | |
| Resistance Of surface wear | 350 (Revolution) | |
| Resistance to immersion in boiling Water -Mass Increase (%) | 10.0 Max. | |
| -Thickness Increase (%) | 11.8 Max. | |
| Resistance to dry heat 180° C | Not worse than 4 | |
| Dimensiona l stability at deviated temperature -Longitudinal (%) | 0.5 Max. | |
| -Transverse (%) | 0.9 Max. | |
| Dimensional stab -Longitudinal(%) -Transveres | 0.375Ma 0.60 | |
| Resistance to impact by small diameter ball | 20N Min. | |
| Resistance to scratching | ZN Min. | |
| Resistance to Staining | Not more than 5 | |
| Resistance to colour change (wool standards) -In Xenon arc light | Not worse than 6 | |
| - In enclosed Carbon arc light | Not worse than 5 | |
| Resistance to cigarette burns | Not more than 3 | |
| Resistance to steam | Not more than 4 | |
| Appearance | Should be free from foreign particles |
- Grades : General and fire retardant [FR]
- Types : Standard, post forming, compact, cabinet liners, backer
- Size : 2440mmx1220mm[8'x4l]
- Thicknesses : 1.00 mm [other thickness available on request]
SIESTA Highlight
Design paper from Japanese & European manufacturers. Manufactured using best quality kraft paper. 100 % Melamine resin and 100 % phenolic resin. Use of best chemical raw materials for better flexibility & durability. PP wrapping film for surface protection till completion of furnishing work for P.G.
Care & Maintenance
Cleaning should be carried out with a soft moist cloth and warm soap solution. Do not use detergents containing abrasive particle or excess soda.
Disclaimer
Customers are advised to reconfirm selected laminate when placing orders as our liability does not include claims arising from sample chip pasting error. Samples presented are indicative of colour, pattern and surface finish but not of actual thicknesses. All metallic patterns series recommended for vertical application only. Information and samples for special cabinet liners, phenolic boards, special purposes compact laminates and post forming laminates are available on request.
Limited Warranty
SIESTA LIMITED warrants that its products are reasonably free from manufacturing defects. The products when properly used, will comply, with normal deviations, to related manufacturing specifications. This warranty shall be limited only to the original buyer for a period of care, improper use and/ or any alteration. It is recommended that the products must be inspected prior to installation and our liability will be limited to the extent of the cost of the products only. Siesta are used for various applications, without the possibility of control over the manufacturing of the finished products. The company does not assume obligations or liabilities arising from the furnishing, sale, installation or repair, use or subsequent sale of any product, to any person or entity.
DECORATED
AVAILABLE
SURFACE
ACROSS INDIA
